Hebei anping county after zhao tuan development zone
  moqiwiremesh@126.com   /   3243483361@qq.com     

Hebei MOQI Metal Wire Mesh Products Co., Ltd.

We have 200 sets of gabion machine.which can make sure of the delivery time.
We produce galvanized wire by ourselves. 



You are here: Home » News » Product Knowledge » How Is The Galvanized Thickness Of Galvanized Wire
News classification
Contact us
ADD: Hebei anping county after zhao tuan development zone
TEL: 18832824868
FAX: 18832824868

How Is The Galvanized Thickness Of Galvanized Wire

Views:1     Author:Site Editor     Publish Time: 2018-07-09      Origin:Site Inquire

The thickness is multiplied by the area (1 square meter) and multiplied by the density of metal zinc (7.14 g/cm3) to determine the amount of zinc (g/m2 or mg/m2).

The High Tensile Galvanized iron Wire is made of high-quality low-carbon galvanized wire. After being formed by automatic precision and accurate mechanical equipment spot welding, it adopts the surface treatment of zinc immersion process, and the production of conventional British standard. The mesh surface is smooth and tidy, and the structure is firm and uniform. Good performance, even if it is partially cut or subjected to pressure, it will not loosen. It is the strongest anti-corrosion property in the whole High Tensile Galvanized iron Wire, and it is also one of the most widely used net types of iron mesh, high-quality anti-corrosion. Sexuality makes it popular in the breeding industry. The smooth and neat mesh surface adds a sense of look and can play a certain decorative role. This feature also makes High Tensile Galvanized iron Wire perform in the mining industry due to the use of low-carbon quality materials. It makes it unique and has no flexibility. It determines its plasticity during use, which can be used for deep processing of hardware technology, complex wall squashing, underground leakage prevention and cracking. The light weight of the net body makes this cost much lower than the cost of the iron screen, and it is more economical and affordable. The Hot Dipped Galvanized Steel Iron Wire needs to be cleaned before plating:

Compared with other galvanizing processes, the preplating cleaning requirements for the substrate during cyanide galvanizing are low. However, in the current trend of increasing the quality grade of cyanide galvanized layer, some pollutants are introduced into the plating tank. Obviously become harmful. Since cleaning the galvanized layer wastes a lot of time and reduces the yield, it is very important to properly clean the substrate and perform an effective rinsing operation before plating. Defects such as surface film removal, surface inclusions, etc., which are widely removed from the exterior of the deposited layer, can be found and treated by conventional techniques; excess foam is formed by the incorporation of soap and saponifiable fatty surfactant into the bath. Moderate foam formation rates may be harmless. The large amount of tiny homogenous particles present in the bath stabilizes the foam layer, but the accumulation of too much solid particles can cause an explosion. Use activated carbon to remove surface active substances. Or it is an effective measure to make the foam less stable by filtration; other measures should be taken to minimize the amount of surfactant introduced. The introduction of organic matter can significantly reduce the plating speed. Although the chemical formulation is advantageous for high deposition speeds, the thickness of the coating cannot be satisfied after the organic matter is brought into the person, so the activated carbon can be used to treat the bath.


content is empty!



MOQI is a company based on galvanized wire in 1993.




 Tel: 86-18832824868
 Phone: 86-18832824868
 Add: Hebei anping county after zhao tuan development zone


Be the first to know about our lastest products.